Allied Vision Technologies F-131C Instruction Manual download pdf (Page 9)

Mako Technical Manual V3.0.0

Introduction

Before operation

Target group This Technical Manual is the guide to detailed technical information of the

camera and is written for experts.

Getting started For a quick guide on how to get started, read the GigE Installation Guide first.

Heat dissipation

Due to the small packaging and high speed of Mako cameras, take care to ensure

that the housing temperature of the camera does not exceed 45 °C. The follow-

ing are general guidelines for heat dissipation:

• Mount the camera on a heat sink such as a metal bracket.

• Lenses, when attached to a camera, act as a heat-sink and help reduce

housing temperature.

• Ensure sufficient air flow. Use a fan if necessary.

www



To download the GigE Installation Guide and GigE Camera

and Driver Features, go to:

http://www.alliedvisiontec.com/emea/support/downloads/

product-literature.html

www



Software packages (including documentation and release

notes) provided by Allied Vision can be downloaded from:

http://www.alliedvisiontec.com/emea/products/

software.html

Caution



Before operating any Allied Vision camera, read the safety

instructions and ESD warnings in the GigE Installation

Guide.

Note



Housing temperature of the camera will increase during

power-up and initial operation. This temperature will

later stabilize.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 77 78

No comments

Allied Vision Technologies F-131C Instruction Manual Page 9