Allied Vision Technologies F-131C Instruction Manual download pdf (Page 10)

Mako Technical Manual V3.0.0

Camera cleaning instructions

This chapter describes safety instructions/cautions valid for Mako cameras in

case of cleaning lenses, optical filters/protection glass or sensors.

Warranty

Avoiding the necessity of camera cleaning

When screwing/unscrewing the camera lens or dust cap, hold the camera with

the C-Mount / CS-Mount opening towards the floor as shown in figure 1. This

minimizes the possibility of any contaminants falling on the glass surface.

Always store cameras and lenses with dust-caps installed.

Note



• Please read these instructions before you contact your

Allied Vision camera dealer for assistance.

• Ask your Allied Vision camera dealer if you are not famil-

iar with the procedures described below.

www



For details about camera warranty duration and sen-

sor warranty terms, visit:

http://www.alliedvisiontec.com/emea/support/

warranty.html

Caution



Warranty precautions

• To ensure your warranty remains in effect:

– Do not open the camera housing.

– Follow instructions described below.

– Use only optical quality tissue/cloth if you must clean

a lens or filter.

– Use only optics cleaner (60% ethyl alcohol, 40%

ether). Never use aggressive cleaners like benzine or

spirit. Such cleaners may destroy the surface.

– Do not use compressed air which can push dust

into camera and lens.

• Allied Vision does not warranty against any physical

damage to the sensor/filter/protection glass or lenses.

Use utmost care when cleaning optical components.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 77 78

No comments

Allied Vision Technologies F-131C Instruction Manual Page 10