Allied Vision Technologies F-131C Instruction Manual download pdf (Page 16)

Mako Technical Manual V3.0.0

Specifications

Mako G-030B/C

Caution



Before operating any Allied Vision camera, read the safety

instructions and ESD warnings in the GigE Installation

Guide.

http://www.alliedvisiontec.com/emea/support/downloads/

product-literature/hardware-installation-guide.html

Caution



Due to the small packaging and high speed of Mako cameras,

take care to ensure that the housing temperature of the cam-

era does not exceed 45 °C. The following are general guide-

lines for heat dissipation:

• Mount the camera on a heat sink such as a metal bracket.

• Lenses, when attached to a camera, act as a heat-sink and

help reduce housing temperature.

• Ensure sufficient air flow. Use a fan if necessary.

Note



All measurements were done without protection glass /

without filter.

The uncertainty in measurement of the quantum efficiency

values is 10%.

This is due to:

• Manufacturing tolerance of the sensor.

• Uncertainties in the measuring apparatus itself

(Ulbricht sphere, optometer, etc.).

Feature Specification

Resolution 644 x 484

Sensor CMV300-3E7M1WP (mono) / CMV300-3E7C1WP (color)

Type CMOS Progressive

Sensor size Type 1/3

Cell size 7.4 m

Lens mount C / CS-Mount

Max frame rate at full resolution 309 fps

Max image bit depth 12 bit

Table 3: Mako G-030B/C camera specifications

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 77 78

No comments

Allied Vision Technologies F-131C Instruction Manual Page 16