Allied Vision Technologies F-131C Instruction Manual download pdf (Page 66)

Mako Technical Manual V3.0.0

Resolution and ROI frame rates

This section charts the resulting frame rate from changing sensor height from

full image to a single line. Unless otherwise noted, sensors do not give an

increase in readout speed with a reduction in width.

Note



• Data was generated using StreamBytesPerSecond = 124

MB/s (full bandwidth) and an 8-bit pixel format. Frame

rates may be lower if using network hardware incapable

of 124 MB/s.

• ROIs are taken as center image for maximum speed

advantage, where feature OffsetY = (full sensor height –

ROI height)/2.

• BinningVertical is horizontal row summing on CCD

before readout. The frame rate for an ROI at the same

effective height as binning will be slower because the CCD

still needs to read out the “fast readout rows” in ROI

mode.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 77 78

No comments

Allied Vision Technologies F-131C Instruction Manual Page 66