Allied Vision Technologies F-131C Instruction Manual download pdf (Page 27)

Mako Technical Manual V3.0.0

Specifications

Mako G-131B/C

Feature Specification

Resolution 1280 x 1024

Sensor e2v EV76C560

Type CMOS Progressive

Sensor size Type 1/1.8

Cell size 5.3 m

Lens mount C / CS-Mount

Max frame rate at full resolution 62 fps

Max image bit depth 10 bit

On-board FIFO 64 MByte, up to 50 frames at full resolution, Mono8/Bayer8, and a GevSCP-

SPacketSize = 8192 bytes per packet

Mono formats Mono8, Mono10

Color formats BayerGB8, BayerGB10, Mono8, RGB8Packed, BGR8Packed, YUV411Packed,

YUV422Packed, YUV444Packed

Exposure control

PixelFormat

ShutterMode:

Global

ShutterMode:

GlobaReset

ShutterMode:

Rolling

Mono8, Mono10, BayerGB8,

BayerGB10, YUV411Packed,

YUV422Packed

12 µs to 1.012 s 12 µs to 0.978 s 12 µs to 0.994 s

RGB8Packed, BGR8Packed,

YUV444Packed

12 µs to 2.124 s 12 µs to 2.053 s 12 µs to 2.086 s

Gain control 0–24 dB

Binning Horizontal: 1 to 2 pixels; Vertical: 1 to 2 rows

Decimation Horizontal and Vertical: 1, 2, 4, 8 factor

Opto-coupled I/Os 1 input, 3 outputs

Voltage requirements 12–24 VDC or PoE

Power consumption 2.0 W @ 12 VDC, 2.2 W PoE

Trigger latency* Idle state: 32.6 µs

Frame valid state: 32.6 µs

Trigger jitter* Idle state: 8.1 µs

Frame valid state: 8.1 µs

Operating temperature +5°C to +45°C (housing temperature)

Storage temperature -10°C to +70°C ambient temperature (without condensation)

Body dimensions (L x W x H) 60.5 x 29 x 29 mm; including connectors, without tripod and lens

Mass 80 g (without lens)

Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX

Software interface standard GigE Vision Standard 1.2

Camera control interface GenICam V1.0 compliant

Regulatory CE, FCC Class B, RoHS (2011/65/EU), WEEE

*These values are calculated directly from the microcontroller source. These values are only valid for pixel formats <

16 bit per pixel and applicable in both Idle and Frame valid state:

– Idle state: sensor is ready and camera is idle, waiting for the next trigger

– Frame valid state: sensor is reading out and camera is busy. If the next frame is requested by an external

trigger in this state, higher latency may occur as compared to the Idle state

Table 8: Mako G-131B/C camera specifications

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 77 78

Comments to this Manuals

No comments

Allied Vision Technologies F-131C Instruction Manual Page 27

Comments to this Manuals

Related products and manuals for Bridge cameras Allied Vision Technologies F-131C