Allied Vision Technologies F-131C Instruction Manual download pdf (Page 23)

Mako Technical Manual V3.0.0

Specifications

Mako G-095B/C

Feature Specification

Resolution 1292 x 734

Sensor SONY IT CCD ICX692ALA/AQA with EXview HAD CCD II

Type CCD Progressive

Sensor size Type 1/3

Cell size 4.08 m

Lens mount C / CS-Mount

Max frame rate at full resolution 42.8 fps

Max image bit depth 12 bit

On-board FIFO 64 MByte, up to 69 frames at full resolution, Mono8/Bayer8, and a

GevSCPSPacketSize = 8192 bytes per packet

Mono formats Mono8, Mono12Packed, Mono12

Color formats BayerRG8, BayerRG12, BayerRG12Packed, Mono8, RGB8Packed,

YUV411Packed, YUV422Packed, YUV444Packed, BGR8Packed

Exposure control 41 µs to 84 s

Gain control 0–32 dB

Horizontal binning 1 to 8 columns

Vertical binning 1 to 14 rows

Opto-coupled I/Os 1 input, 3 outputs

Voltage requirements 12–24 VDC or PoE

Power consumption 2.2 W @ 12 VDC, 2.5 W PoE

Trigger latency* Idle state: 7.0 µs

Frame valid state: 22.8 µs

Trigger jitter* Idle state: 4.0 µs

Frame valid state: 19.8 µs

Operating temperature +5°C to +45°C (housing temperature)

Storage temperature -10°C to +70°C ambient temperature (without condensation)

Body dimensions (L x W x H) 60.5 x 29 x 29 mm; including connectors, without tripod and lens

Mass 80 g (without lens)

Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX

Software interface standard GigE Vision Standard 1.2

Camera control interface GenICam V1.0 compliant

Regulatory CE, FCC Class B, RoHS (2011/65/EU), WEEE

*It is possible to start the exposure of the next frame while the previous frame is read out:

– Idle state: sensor is ready and camera is idle, waiting for the next trigger

– Frame valid state: sensor is reading out and camera is busy. If the Next frame is requested by an

external trigger in this state, higher latency may occur as compared to the Idle state

Table 6: Mako G-095B/C camera specifications

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 77 78

No comments

Allied Vision Technologies F-131C Instruction Manual Page 23