Allied Vision Technologies F-131C Instruction Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Mako Technical Manual V3.0.0
19
Specifications
Mako G-032B/C
Feature Specification
Resolution 658 x 492
Sensor SONY IT CCD ICX424AL/AQ with HAD microlens
Type CCD Progressive
Sensor size Type 1/3
Cell size 7.4 m
Lens mount C / CS-Mount
Max frame rate at full resolution 102 fps
Max image bit depth 12 bit
On-board FIFO 64 MByte, up to 202 frames at full resolution, Mono8/Bayer8, and a
GevSCPSPacketSize = 8192 bytes per packet
Mono formats Mono8, Mono12Packed, Mono12
Color formats BayerRG8, BayerRG12, BayerRG12Packed, Mono8, RGB8Packed,
YUV411Packed, YUV422Packed, YUV444Packed, BGR8Packed
Exposure control 10 µs to 93 s
Gain control 0–30 dB
Horizontal binning 1 to 8 columns
Vertical binning 1 to 14 rows
Opto-coupled I/Os 1 input, 3 outputs
Voltage requirements 12–24 VDC or PoE
Power consumption 2.4 W @ 12 VDC, 2.8 W PoE
Trigger latency* Idle state: 7.2 µs
Frame valid state: 16.9µs
Trigger jitter* Idle state: 4.0 µs
Frame valid state: 13.7 µs
Operating temperature +5 °C to +45 °C (housing temperature)
Storage temperature -10°C to +70°C ambient temperature (without condensation)
Body dimensions (L x W x H) 60.5 x 29 x 29 mm; including connectors, without tripod and lens
Mass 80 g (without lens)
Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
Software interface standard GigE Vision Standard 1.2
Camera control interface GenICam V1.0 compliant
Regulatory CE, FCC Class B, RoHS (2011/65/EU), WEEE
*It is possible to start the exposure of the next frame while the previous frame is read out:
Idle state: sensor is ready and camera is idle, waiting for the next trigger
Frame valid state: sensor is reading out and camera is busy. If the Next frame is requested by an
external trigger in this state, higher latency may occur as compared to the Idle state
Table 4: Mako G-032B/C camera specifications
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 77 78

Comments to this Manuals

No comments