Marlin Technical ManualV.2.7.0
211
Configuration of the camera
Having generated the correction data it is possible to separately control the
blemish pixel correction with the help of the following register:
Input/output pin control
Register Name Field Bit Description
0xF1000294 BLEMISH_CONTROL Presence_Inq [0] Indicates presence of this fea-
ture (read only)
ComputeError [1] see DSNU_CONTROL
--- [2..3]
ShowImage [4] see DSNU_CONTROL
ComputeData [5] see DSNU_CONTROL
ON_OFF [6] blemish correction On/Off
ON: High
Default: OFF
Busy [7] see DSNU_CONTROL
SaveData [8] Save blemish correction data
to flash
LoadData [9] Load blemish correction data
from flash
ZeroData [10] see DSNU_CONTROL
--- [11..23] Reserved
GrabCount [24..31] see DSNU_CONTROL
Table 112: Advanced register: Blemish
Note
• See Chapter Input/output pin control on page 50
• See Chapter IO_INP_CTRL 1-2 on page 50
• See Chapter IO_OUTP_CTRL 1-2 on page 54
• See Chapter Output modes on page 55
Comments to this Manuals