Marlin Technical ManualV.2.7.0
152
Controlling image capture
Deferred image transport is especially useful for multi-camera applications:
Assuming several cameras acquire images concurrently. These are stored in the
built-in image memory of every camera. Until this memory is full, the limiting
factor of available bus bandwidth, DMA- or ISO-channel is overcome.
HoldImg mode
By setting the HoldImg flag, transport of the image over the 1394 bus is stopped
completely. All captured images are stored in the internal ImageFiFo. The cam-
era reports the maximum possible number of images in the FiFoSize variable.
Model Memory Size
Marlin F-033 17 frames
Marlin F-046 13 frames
Marlin F-080 7 frames
Marlin F-131 4 frames
Marlin F-145 3 frames
Marlin F-146 3 frames
Marlin F-201 2 frames
Table 74: FIFO memory size
Note
Configuration
To configure this feature in an advanced register: See Table
108: Advanced register: Deferred image transport on page
208.
Note
• Pay attention to the maximum number of images that can
be stored in FIFO. If you capture more images than the
number in FIFOSize, the oldest images are overwritten.
•The extra SendImage flag is set to true to import the
images from the camera. The camera sends the number of
images that are entered in the NumOfImages parameter.
•If NumOfImages is 0 all images stored in FIFO are sent.
•If NumOfImages is not 0, the corresponding number of
images is sent.
•If the HoldImg field is set to false, all images in
ImageFIFO are deleted. No images are sent.
• The last image in the FIFO will be corrupted, when simul-
taneously used as input buffer while being read out. Read
out one image less than max. buffer size in this case.
Comments to this Manuals