Allied Vision Technologies MF-145B2 Instruction Manual download pdf (Page 36)

Camera interfaces

7 Camera interfaces

In addition to the two status LEDs, there are two jacks located at the rear of the camera. The

12-pin HiRose plug provides different control inputs and output lines. The IEEE-1394 connector

with lock mechanism provides access to the IEEE-1394 bus and thus makes it p

the camera and output frames.

ossible to control

Figure 19: Rear view of camera

IEEE-1394 port pin assignment

e IEEE-1394 plug is designed for industrial use and has the following pin assignment as per

ecification:

ables with latching connectors on one or both sides can be used and are available with lengths

our local dealer for more details.

7.1

Pin Signal Pin Signal

1 Cable 4 TPB+

power

2 Cable

GND

5 TPA-

3 TPB-

6 TPA+

Table 12: IEEE-1394 pin assignment

Figure 20: IEEE-1394 connector

of 4.5m or 10m. Ask y

MARLIN Technical Manual

Page 36

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 182 183

No comments

Allied Vision Technologies MF-145B2 Instruction Manual Page 36